Fixing Common Thermostat Problems

Most homeowners have little HVAC knowledgelight switch. Some digital thermostats have two
beyond using the thermostat. If your thermostatdifferent power sources: battery and wired from
fails, many people end up calling a Denver HVACthe external unit. The batteries power the display,
company thinking there is something wrong withso if the batteries go out, the display stops
their air conditioning equipment when in reality,working but the ac unit does not stop cooling. You
there is something wrong with the thermostat.can save yourself a lot on calling a Denver air
When the AC refuses to turn on, it can be hardconditioning repair company by simply replacing
for someone who is not an HVAC expert tothe batteries. The batteries are there to maintain
determine if the problem is in the equipment or inyour programmed thermostat settings in case the
the thermostat.power goes out.
However, before you call a Denver HVACIf the problem with the thermostat is not the
company, try and follow this troubleshooting guidepower, it could be the location the thermostat is
to see if you can get to the root of the problem.installed. Except in very advanced models with
Even more advanced digital and zone-controlmultiple temperature sensors over the building,
thermostats really just function as thermometersmost thermostats have the thermometer built in.
that switch the HVAC system on and offThat means if the thermostat was built into an
depending on the temperature. As an electronicarea that does not represent the air temperature
switch, the thermostat needs to be hooked up toin your home then it will give false readings.
power in order for it to work and communicateThermostats with mercury bulbs need to be level
with the heating and air conditioning equipment.to give accurate temperature readings. Heating
Usually the power for the thermostat comesanticipatory can also get out of whack when not
from the air conditioning unit itself. So any breakproperly calibrated. The anticipatory needs an amp
along this line could cause the thermostat to turnmeter in mechanical thermostats to adjust to
off. You can check the circuit breaker in the airmake sure it properly keeps the blower running
handler or heating split system to see if it haspast the burner time to get excess hot air out of
flipped off. Sometimes the handling unit also has athe ducts.
power switch outside the unit that looks like a